1 . Format : 128X64 Dots . 2 . LCD mode : STN, Blue，Negative, Transmissive Mode . 3 . Viewing direction : 6 o’clock . 4 . Driving scheme : 1/64 Duty, 1/9 Bias . 5 . Low power operation : Power supply voltage (VDD): 3.0V . 6 . VLCD adjustable for best contrast : LCD driving voltage (VOP): 9.5V . 7 . Operating temperature : -20℃~70℃ . 8 . Storage temperature : -30℃~80℃ 9 . Module size : 69.5mm(L)*50mm(W)*2.85mm(T) . 10 . Viewing area : 65.5mm(L)*38mm(W) . 11 . Dot pitch : 0.475mm(L)*0.515mm(W) . 12 . Dot size : 0.45mm(L)*0.49mm(W) .Send InquiryChat Now
Blue Negative Transmissive STN 12864
1. Product introduction of the Blue Negative Transmissive STN 12864:
PIN DESCRIPTION :
36 NC -----
35 /CS1 This is the chip select signal. When /CS1 = “L” and CS2 = “H”, then the chip select becomes active, and data/command I/O is enabled
34 /RES When /RES is set to “L”, the settings are initialized
33 RS Selects register date “H” and instruction “L”
32 /WR In 6800 mode, it’s Read/Write control pin. In 8080 mode, when /WR=0, write is active.
31 /RD In 6800 mode, it’s enable control pin. In 8080 mode, when /RD=0, read is active.
30~23 D0~D7 8bit Bi-directional data bus.
21,22 VDD Supply voltage for logic circuit +3.3V
19,20 VSS Ground
18 11~17 VOUT , CAP4+, CAP2-, CAP2+, CAP1+, CAP1,CAP3+,CAP5+ DC/DC voltage converter.
6~10 V0,V1, V2, V3, V4 Driving supply voltage. V0≥V1≥V2≥V3≥V4≥VSS
5 VR Outpu t voltage regulator terminal.
4 C86 C86=”H”:6800 Series MPU interface. C86=”L”: 8080 Series MPU interface.
3 P/S P/S=”H”: Parallel data input/output. P/S=”L”: Serial data input.
2 /HPM This is the power control terminal for the power supply circuit for liquid crystal drive. /HPM = “H”: Normal mode , /HPM = “L”: High power mode
1 IRS IRS=”H”: Use the internal resistors. IRS=”L”: Do not use the internal resistors.
2. Product parameterof the Blue Negative Transmissive STN 12864 :
3. Product Applications of the Blue Negative Transmissive STN 12864:
4. Product details of the Blue Negative Transmissive STN 12864 :
5. Product qualification of the Blue Negative Transmissive STN 12864:
6. Factory work shop:
Shenzhen oksmart LCM photoelectronic Co., LTD founded in 2006, Shenzhen as the core R & D center established three product structure system, including: mono LCD, TFT, OLED display. Main applications is Industrial control digital display, car display, electronic terminal, medical equipment, mobile terminals, smart wear and other human-machine interface areas. In 2017, 100 workshops and Yichun, Jiangxi Province were formally launched. The construction area was 720,000 square meters, and 14 Panasonic fully automated production lines began mass production the annual output value upto 50 billion RMB.