banner
Home » Knowledge » Content
Product Categories

FPC Line

- Jan 29, 2018 -

FPC line

编辑



FPC排线就是可在一定程度内弯曲的连接线组。

FPC cable is connected to a certain extent curved line.

1


简介


FPC排线简介

FPC brief introduction

编辑


说到FPC排线,大家肯定了解或熟悉了FPC是什么?FPC按功能分,可分为很多种,如FPC天线、FPC触摸屏、FPC电容屏等,FPC排线就是其中的一种,通俗点说,FPC排线就是可在一定程度内弯曲的连接线组。

When it comes to the FPC line, you must know or know what FPC is. FPC according to the functions, can be divided into many types, such as FPC antenna, FPC touch screen, FPC capacitive screen, FPC cable is one of the popular point that FPC cable is connected to a certain extent curved line.


FPC排线构成

FPC line composition

编辑


FPC排线因为是FPC的一种,因此,它的构成与FPC的构成相同。FPC一般是长条形的,两端设计成可插拔的针状,可直接与连接器相连或焊接在产品上。中间一般为线路,因为FPC排线都需要一定的柔韧性,因此,基材一般是用压延铜,耐曲折,柔韧。

The FPC line is a kind of FPC, so its composition is the same as the composition of the FPC. FPC is usually long strip, and both ends are designed to be pluggable. It can be directly connected to the connector or welded on the product. The middle is generally a line, because the FPC line needs a certain flexibility, therefore, the base material is generally used to extend copper, flexiability and flexibility.




FPC排线工艺

FPC line process

编辑


FPC排线用到的表面处理工艺一般是沉金,偶尔有防氧化。但防氧化工艺不能耐高温,环境承受能力比沉金差,两者价格相近,因此,绝大部分都采用沉金工艺了。此外,还有镀锡喷锡等工艺,但FPC耐温一般在280摄氏度以下,而喷锡时会有300摄氏度以上的温度,而且锡膏硬度较小,所以也很少采用。

The surface treatment technology used in the FPC line is generally gold, occasionally to prevent oxidation. However, the oxidation resistant process can not withstand high temperature, the environmental bearing capacity is worse than the sinking gold, and the price is similar. Therefore, most of the technology is used for gold sinking. In addition, there are tin plating, tin spraying and other processes, but the FPC temperature is generally below 280 degrees Celsius, while the tin solder will have a temperature above 300 degrees Celsius, and the solder paste is less hardness, so it is rarely used.




FPC排线功能用途

FPC line function use

编辑


FPC排线的功能就在于连接两款相关的零件或产品。现在,很多产品都用到了排线,因为它具有一定的可曲折性,在打印机、手机、笔记本等很多产品中都已采用FPC排线。生产FPC排线的厂家主要集中在珠三角地区,而其中又以深圳为首。

The function of the FPC line is to connect two related parts or products. Nowadays, many products have been used in the wiring, because it has some twists and turns. FPC has been used in many products such as printers, cell phones, notebooks and so on. The manufacturers of FPC lines are mainly concentrated in the Pearl River Delta region, which is led by Shenzhen.




FPC排线技术参数

FPC line technical parameters

编辑


最小线宽线距为3mil/3mil;

The minimum line width is 3mil/3mil;

最小过线孔成品达到0.15mm。

The minimum over - hole finished product reached 0.15mm.