banner
Home » Knowledge » Content
Product Categories

What is the difference between the 3D surface glass and the 2.5D glass?

- Feb 01, 2018 -


核心提示:3D 曲面玻璃的特色符合 3C 产品设计需求。3C 产品设计如智能手机、智能手表、平板计算机、可穿戴式智能产品、仪表板等陆续出现 3D 产品,已经明确引导3D 曲面玻璃发展方向。而2.5D玻璃屏幕是在玻璃的中心有一个平面的区域,然后在平面玻璃的基础上对边缘进行了弧度处理。3D 曲面玻璃的特色符合 3C 产品设计需求。3C 产品设计如智能手机、智能手表、平板计算机、可穿戴式智能产品、仪表板等陆续出现 3D    产品,已经明确引导3D    曲面玻璃发展方向。而2.5D玻璃屏幕是在玻璃的中心有一个平面的区域,然后在平面玻璃的基础上对边缘进行了弧度处理。因为应用2.5D玻璃屏幕能够使手   机表面外观就如同盈而不溢的水滴,所以2.5D玻璃屏幕又称之为水滴屏。

Key hints: the features of 3D surface glass meet the requirements of 3C product design. 3C products such as smart phones, smart watches, tablet computers, wearable smart products, dashboards and other 3D products have emerged. It has clearly guided the development direction of 3D curved glass. And the 2.5D glass screen is in the center of the glass with a plane area, and then on the basis of the plane glass on the edge of the arc treatment. The features of 3D surface glass meet the requirements of 3C product design. 3C products such as smart phones, smart watches, tablet computers, wearable smart products, dashboards and other 3D products have emerged. It has clearly guided the development direction of 3D curved glass. And the 2.5D glass screen is in the center of the glass with a plane area, and then on the basis of the plane glass on the edge of the arc treatment. Because the use of 2.5D glass screen can make the surface of the mobile phone like the water droplets, so the 2.5D glass screen is also called the water drop screen.


3D 曲面玻璃轻薄、透明洁净、抗指纹、防眩光、坚硬、耐刮伤、耐候性佳…等优点,可型塑做出 3D    多形状外观具有产品特殊设计新颖性与质感佳,又可增加弧形边缘触控功能带来出色的触控手感、无线充电机能,并能解决天线布置空间不足及增强收讯功能,使产   品更美观出色,产品设计差异化使消费者更能青睐。

3D surface glass is light, transparent, clean, anti - fingerprint, anti - glare, hard, scratch resistant and good weather resistance. Etc., can make 3D type plastic products with special shape and appearance of novel design and good texture, and can increase the curved edge touch touch touch, bring good wireless charging function, and can solve the problems and enhance the antenna layout space and receiving function, make the product more beautiful and well differentiated consumer product design more popular.

2.5D玻璃屏幕的最主要的作用在于提升屏幕和机身整体的视觉效果,提升手感。在手机屏幕表面覆上一块2.5D的弧面玻璃,能够使手机表面外观就如同盈而     不溢的水滴,更具视觉张力,为手机屏幕的视觉表现力加分不少。而在实际使用中,单手握持并以大拇指来滑动屏幕的操作方式出现几率很高,而当使用者采用这种   姿势时,大拇指的滑动并非平面而是一个弧形,因此2.5D屏的弧面造型更加符合人体工程学原理。

The main function of the 2.5D glass screen is to improve the visual effect of the screen and the fuselage as a whole, and to improve the sense of hand. A 2.5D of arc glass on the surface of the mobile phone can make the appearance of the cell phone look like the water droplet that is full of water, and it has more visual tension. It adds a lot to the visual expression of the cell phone screen. In actual use, in one hand and thumb to slide the screen operation probability is very high, and when the user uses this position, sliding plane not thumb but an arc, so the arc shape of 2.5D screen more in line with the principle of human body engineering.


在手机用保护玻璃的市场总产值方面,2016年手机用的3D保护玻璃的市场产值预计将达4亿7,500万美金,达13.3%的份额。2017年该占比预计将增至22.6%;2018年将超过2D保护玻璃,达29.5%的份额

In terms of the total market output value of protective glass for mobile phones, the market value of 3D protected glass for mobile phones is expected to reach 475 million US dollars in 2016, reaching 13.3% share. In 2017, the ratio is expected to increase to 22.6%; in 2018 it will exceed 2D protected glass, with a share of 29.5%