super tft lcd color tv monitor active matrix 240X320 display Tft lcd main application features: The use of good characteristics: low voltage applications, low drive voltage, solid-state use of increased safety and reliability; flat, thin, saving a lot of raw materials and use of space; low power...Send InquiryChat Now
Tft lcd main application features: The use of good characteristics: low voltage applications, low drive voltage, solid-state use of increased safety and reliability; flat, thin, saving a lot of raw materials and use of space; low power consumption, its power consumption About one-tenth of crt display, reflective tft-lcd is only about one percent of crt, which saves a lot of energy;
|No||OKT0280||Size||Resolution||Outline Dimension||Viewing Angel||Interface|
|5||OKT0280-01||2.80 inch||240X320||50.00*69.20 *2.40mm||12 o’clock||SPI|
|6||OKT0350-01||3.50 inch||240X320||76.90*63.90*3.26mm||6 CLOCK||RGB|
|7||OKT0400-01||4.00 inch||480x800||57.84*98.80*2.50mm||6 o’clock||MIPI-2Lane|
|8||OKT0430-01||4.30 inch||480x272||67.20*105.50*2.90mm||12 o’clock||RGB|
|9||OKT0500-01||5.00 inch||800*480||120.70*75.90*4.35mm||6 o’clock||RGB|
|10||OKT0500-02||5.00 inch||480*272||120.70*75.80*3.00mm||12 o’clock||RGB|
|12||OKT0700-01||7.00 inch||1024RGB*600||165.00*100.00*2.80mm||3 o’clock||LVDS|
Shenzhen oksmart LCM photoelectronic Co., LTD founded in 2006, Shenzhen as the core R & D center
established three product structure system, including: mono LCD, TFT, OLED display. Main applications is
Industrial control digital display, car display, electronic terminal, medical equipment, mobile terminals, smart wear and other human-maachine interface areas. In 2017, 100 workshops and Yichun, Jiangxi
Province were formally launched. The construction area was 720,000 square meters, and 14 Panasonic fully automated production lines began mass production the annual output value upto 50 billion RMB.
Any assistance, welcome to contact us.
Q: How does OK guarantee the quality?
OK has passed ISO9001:2008 certification. ISO principle is carried out in daily activities. The quality is strictly controlled in designing, material incoming, production process, equipment, management and checking and the rejects are not allowed to flow at any circumstances.
OK has thousands of customers, in many cases, one product is being used by many customers. If one product is used by many factories, the quality is believable because most of the problems were solved already.
The OK is following the quality standards from automotive industry. Special attention is paid to the capacity of anti-high-temperature, anti-shock and aftersales reliability. We don’t fear the rejects on the production line, we badly fear the rejects at the final consumer’s hand. Solving such kind of rejects are most costly. Startek is always pursuing 0 aftersales reject, so we adopted the strictest quality standards.
Q:What should I do if a part I receive is damaged?
It is extremely rare to receive a damaged part because we quality test all of our parts before shipping them out.
However if you believe a part you ordered was damaged before you tried to install it,
keep it in its’ original box and wrapping and contact us so that we may assist you.
Q:Are you manufactory or trade company?
We are the ODM and OEM manufactory specialized in FSTN, STN and TFT more than 10 years in Shenzhen! Our factory have passed IS09001:2000,SGS Factory Audit and ISO14001:2004. Our advanced full set equipments make sure good quality and competitive price!
Q:Can you design the lcd in acccordance with our demand?
Sure.We will give you the best tooling charge.
Q: Where to get the datasheet before or after purchase?
Please send email to Jane Jiang, we will reply you in 24hours
More questions, please contact: